[Boatanchors] Desk Console Project

[Bill Cromwell]

Hi,

Have a look at some woodworking and cabinet making sites. Be sure to use 
materials and designs that can bear the weight for long periods without 
warping from the weight. Probably not the pine lumber from the box 
stores. Best to you and your project. And yes, keep us posted.

73,

Bill  KU8H

bark less - wag more

On 10/17/20 2:21 PM, Keith Densmore wrote:
> Greetings All,
> I have decided to embark on a project to build (or have someone build) a
> wooded desk console to hold rack gear (19 inch). Some of the gear has a
> depth of 20 inches or so (RA-17), so that would be the depth. Height of
> each module would also be about 20 inches as well.  The front of the module
> would have a slightly back sloping front.
> I have the desk but need to build the console part. I was thinking as
> building them individually, 3 or 4 in total.
> A picture included a metal console--sort of what the finished product would
> emulate.
> Question--does anyone know of some kind of plan to accomplish this? Ideas?
> 
> Thanks all,
> Keith ve3gem
> 
> 
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> 
> List Administrator: Gary Harmon, K5JWK
> ** For Assistance: gharmon at idworld.net **
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wrcromwell at gmail.com
>