[Boatanchors] QEX Dec 1988 Article

arc5 at ix.netcom.com arc5 at ix.netcom.com
Sun Jul 12 21:12:12 EDT 2020


Sorry I'm behind.  Who needed these and hiw many?------ Original message------From: hwhall at compuserve.comDate: Sun, Jul 12, 2020 2:25 PMTo: boatanchors at mailman.qth.net;Cc: Subject:Re: [Boatanchors] QEX Dec 1988 ArticleRe: making your own. There are also "cup cores" with plastic bobbins you can chuck into a drillmotor or other winding device. Far easier than shoving wire through a toroid. Though I admit I don't know what cores you'd want to choose for the same or better operation as the traditional telco 88mH coils.
Pic of what I'm talking about:
https://www.picclickimg.com/d/l400/pict/261585024927_/Pot-Core-18x11-Bobbin-2x-Set-Kit.jpg
Wayne
WB4OGM
-----Original Message-----
From: McDonald, J Douglas 
Cc: boatanchors at mailman.qth.net 
Sent: Sun, Jul 12, 2020 9:33 am
Subject: Re: [Boatanchors] QEX Dec 1988 Article

..  It’s
too bad that 88/44/22 mH coils have become so seemingly scarce. ...

Its not hard to make your own, if you don't mind them being
a bit larger than the originals.  The large toroid cores are readily available
and being large, require fewer turns, and make it easier to get the bobbin through.

I can look up the specs of the cores I used. They are expensive but cheaper
than ePay prices for the old original these days.

I've made medium impedance (500-5000 ohms) audio filters
with excellent response for CW with these, similar to the audio filter
in the R-390A, and used them with good effect with my SX-88,
NC-400, and BC-453.

I tried cores the size of the original 88 mH ones and gave up from bobbin frustration.

Doug McDonald
______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net

List Administrator: Gary Harmon, K5JWK
** For Assistance: gharmon at idworld.net **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hwhall at compuserve.com 
______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net

List Administrator: Gary Harmon, K5JWK
** For Assistance: gharmon at idworld.net **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arc5 at ix.netcom.com 


More information about the Boatanchors mailing list