[Boatanchors] TS-830S

[David Harmon]

Best thing to do is join Kenwood-Hybrids.groups.io and ask.
Lots of knowledgeable guys there regarding all the KW hybrid rigs.


73

David Harmon
K6XYZ
Sperry, OK

-----Original Message-----
From: boatanchors-bounces at mailman.qth.net
[mailto:boatanchors-bounces at mailman.qth.net] On Behalf Of Ed - K9EW
Sent: Monday, January 13, 2020 9:41 AM
To: boatanchors at mailman.qth.net
Subject: [Boatanchors] TS-830S

I'm repairing a TS-830S, and the last thing on the list is no Drive
indication on the meter in the ALC position of the meter switch.  I've
measured plenty of drive signal on a 'scope, but nothing on the meter.  I
know the meter works because I can see the HV.  The 6146's are removed until
I fix the drive meter problem.

I'm assuming there's a circuit somewhere that samples the Drive signal and
rectifies it for the meter to read, but I can't find the circuit on the
schematic.  Can someone tell me where to look for that circuit?  I'm
guessing (and hoping) there's a blown diode that needs to be replaced - if
only I could find it.

Thanks - ed, k9ew
______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net

List Administrator: Gary Harmon, K5JWK
** For Assistance: gharmon at idworld.net **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to k6xyz at sbcglobal.net