[Boatanchors] OMEGA ELECTRONICS

[Dale Parfitt]

Has anyone ever heard of this company and the HBR-9? Maybe just a prototype
one-off?
https://www.youtube.com/watch?v=FSbxS2JFmfA
Tnx,
Dale W4OP

-----Original Message-----
From: boatanchors-bounces at mailman.qth.net
[mailto:boatanchors-bounces at mailman.qth.net] On Behalf Of Bill Stewart
Sent: Wednesday, November 29, 2017 2:51 PM
To: boatanchors
Subject: Re: [Boatanchors] National HRO-7 Chassis/Cabinet Disassembly
Problem

Ok...I got the dial off. Used some on-hand PB Blaster and it came off with
just slight hand pressure....all of those type 'looseners' are pretty
amazing. 

Now the problem is getting the chassis out of the cabinet. I have loosened
all the control nuts and screws. The only thing holding it now seems to be
the tabs that stop the upward rotation of the coil levers. Those tabs/stops
stick about 1/8 inch above the cabinet edge around the coil window and the
cabinet wont go up far enuf to clear those stops. 
>From inside I see a nut on each side, looks like directly behind the levers.
Can't reach 'em since they are at the front of the chassis. Do these have to
be removed to get the levers out of the way? 

Anyone been down this road before? 

Tnx...73 de Bill K4JYS 


______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html