[Boatanchors] Stancor 110CM transmitter

[Brian Harris]

I am doing a complete rebuild of a fairly rare 1941 Stancor 110CM transmitter.  The cabinet and front panel are at the powder coat shop now.  The chassis has been stripped of its components, bead blasted, primed and is ready for paint.  Some time in this transmitter's life an incorrect meter was installed.  The design calls for a 200 mA meter and the one that was installed is a 300 mA meter.  I would like to replace that with the proper meter.  Unfortunately my ample meter collection (around 100) revealed nothing close so I am asking that you check your junk boxes.  The required meter has a square face of 3" on a side.  The front panel will accept a 2-3/4" diameter meter.  The four mounting bolts are 2-1/4" apart.  I would like a Triplett or Simpson if possible but beggars can't be chosers.  I will gladly any reasonable price or swap for some of my meters or other goodies you might need. 

If you've never seen a Stancor 110CM you can see mine in the picture section at www.myhamshack.com/wa5uek

Thank you,    

Brian Harris, WA5UEK
 cell 214-763-5977
 email cosmophone at yahoo.com