[Boatanchors] Source for #2-64 cheesehead screws?

[Pete Lancashire]

Great idea, long long long ago I started working at a Avionics shop, if the
instrument guys are still the same, they never throw anything out.

-pee

On Sat, Jan 16, 2016 at 6:22 PM, <w5jo at brightok.net> wrote:

> Since you are dealing with an altimeter why not search for altimeter
> repair shops then see if anyone can direct you to what you need.  Some of
> the old repair shops may have what you need.
>
> Jim
> W5JO
>
>
> -----Original Message-----
> I'm hoping someone knows where to find an odd item like this one.  It's to
> replace the lockdown screw on a WWII-vintage altimeter.  The original was
> blackened brass, with a square shouldered head (which I've heard called
> cheeseheads) 7/32 inch in diameter & 1/16 inch thick.  Threads were #2-64 &
> a little less than 1/4 inch long.  McMaster-Carr, normally a name to
> conjure with, doesn't have anything that small, and that's an unusually
> large head for such small threads.
>
> Thanks & 73,
>
> Wayne
> WB4OGM
>
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to xyzzypdx at gmail.com
>