[Boatanchors] Question...

[Jim Liles]

When Epoxy in not totally cured it's conductive -- careful.

-----Original Message----- 
From: John Saxon via Boatanchors
Sent: Wednesday, November 25, 2015 3:56 PM
To: Boatanchors Mail List
Subject: [Boatanchors] Question...

I'm cleaning up my Elmac AF-68A and was putting the 6146 into a tube socket 
extender, and the key plastic stud broke off.  The glass bottle is still 
intact.  Here are my questions for those of you who know what they are 
doing:
1. Is this repairable?2. If so, I assume some sort of glue/epoxy..  would be 
needed.3. In my bench I have:  J-B Weld, Locktite epoxy - marine (I think 
this is for fiberglass), Elmer's wood glue and Testor's for plastic model 
planes.4. Will any of these be the right one?5. If not, what do I get?
Thanks!73,JohnK5ENQ
______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hallicrafterssr2000 at k9axn.com