[Boatanchors] Beam question

[D C _Mac_ Macdonald]

The Mosley trap antennas (20/15/10 meters) have only one apparent trap assembly on each half of the dipole. 
 
There are two coils inside those housings.  The smaller coil is the 10 meter portion and will be positioned closest to the center feedpoint and the larger is resonant at 15 meters.
 
As a last resort, go to Mosley's website and get the instructions for the TA-33.  Mosley sold/sells the driven element alone as a TA-31. 
 
I suspect that somebody close to you has a TA-33 instruction sheet that you could copy to get the info you need. 
 
  
* * * * * * * * * * * 
* 73 - Mac, K2GKK/5 * 
* (Since 30 Nov 53) * 
* k2gkk hotmail com * 
* Oklahoma City, OK * 
* USAF & FAA (Ret.) * 
* * * * * * * * * * * 
 

 

 
> From: rayfrijr at msn.com
> To: boatanchors at mailman.qth.net
> Date: Mon, 25 May 2015 10:46:19 -0600
> Subject: [Boatanchors] Beam question
> 
> Was it the Mosley TA-33 that had the cup or circular type antenna traps?
> What would be a good way to clean these traps?   I have the driven element traps and am
> considering making a triband dipole with the driven element.  I looked inside the traps and
> they are dirty inside.
> 
> 
>  		 	   		  
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html