[Boatanchors] [Heathkit] FS: Heath Cantenna

[Bry Carling]

Will studying give me cancer forty years later after I worked with the PCBs? :)

Best regards - Brian Carling
AF4K Crystals Co.
117 Sterling Pine St.
Sanford, FL 32773

Tel: +USA 321-262-5471




> On May 9, 2015, at 11:46 PM, Richard Knoppow <1oldlens1 at ix.netcom.com> wrote:
> 
>    I don't think pure PCBs were used for anything.   The oil used in transformers and capacitors was mineral oil with PCBs added to improve its performance.  Oils with PCBs were very widely used in both high power transformers and in oil filled paper capacitors intended for either long life or high voltage or both.  Most PCBs were made by Monsanto but were used under many brand names by various manufacturers.  General Electric called them Pyranol in their products but GE was only one of the companies to use them. It is difficult now to know if an old capacitor was filled with an oil with PCB in it unless its marked with a trade name.   There is a great deal of infomation available on the web.
>     To be blunt anyone who thinks that the dangers of PCBs or mercury or lead or cadmium are overblown needs to do some studying.
> 
>> On 5/9/2015 8:36 PM, KA4INM wrote:
>>>  On 05/09/2015 11:14 PM, Richard Knoppow wrote:
>>> 
>>>      I found the MFJ cantenna on their web site.  The oil is about $30
>>> a gallon.  I don't know if this includes shipping.   My veterinary
>>> mineral oil cost about $25 a gallon.  The performance of the transformer
>>> oil is significantly better for not much more money.   I don't know what
>>> is used in place of the PCBs AKA Askerel, but it evidently works OK.
>>> PCBs are very toxic.  A web search will get you more than you really
>>> want to know.
>> 
>>  Question solved:
>> 
>> "Transformer oil or insulating oil is a highly refined mineral oil that
>> is stable at high temperatures and has excellent electrical insulating
>> properties. It is used in oil-filled transformers, some types of high
>> voltage capacitors, fluorescent lamp ballasts, and some types of high
>> voltage switches and circuit breakers. Its functions are to insulate,
>> suppress corona and arcing, and to serve as a coolant."
>> 
>>  from:  http://en.wikipedia.org/wiki/Transformer_oil
>> 
>>  Although a mixture of mineral oil and polychlorinated biphenyl (PCB)
>> was sometimes used some, pure PCB was very expensive and used in
>> transformers only where a coolant that does not burn was needed such in
>> buildings a requirement is such places as NYC where there is no room
>> for sub-stations or pole transformers.
>>  Pure PCB can easily be tested for there is no reason to guess,
>> mineral oil floats, but pure PCB sinks in water.
> 
> -- 
> Richard Knoppow
> 1oldlens1 at ix.netcom.com
> WB6KBL
> 
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> Message delivered to bcarling at cfl.rr.com
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html