[Boatanchors] OT? Question on Triplett 630 VOM

[Al Klase]

John,

I think the jacks on the 650 are 5/32" ID, so what you want are test 
leads with 90-degree banana plugs on the meter end.  Looks to me like 
you could buy any of the modern, inexpensive, "saftey-nazi" leads and 
cut the insulating sleeves from the banana plugs.

My two cents,
Al

Al Klase – N3FRQ
Jersey City, NJ
http://www.skywaves.ar88.net/

On 6/20/2015 5:51 PM, John Saxon via Boatanchors wrote:
> Seemed to me like boatanchor experts would be a reasonable place to ask this...pardon if I am misusing bandwidth.
> I have a nice Triplett 630VOM with one issue...the test leads.  The plug that goes into the VOM is a sorta molded rubber fitting with wires coming out the back side.  The test leads are stranded, and all but about 2 or 3 of the strands have broken off, leaving the lead dangling with not much to hold it on.  I am open to suggestions on how to repair the leads.  It looks like to get inside the plug requires cutting off the rubber.
> Any suggestions?
> Thanks,,JohnK5ENQ
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html