[Boatanchors] KWM2A

Raymond Cote bluegrassdakine at hotmail.com
Mon Jan 5 16:18:59 EST 2015


The only times I've had similar problems with disappearing signals was located by tapping components with a tuning wand( that be non-conducting) and it most always was a carbon comp warming up and opening. YMMV

  "Plus ca change, plus c'est la meme chose"

Raymond Cote
KD9CCZ

> On Jan 5, 2015, at 15:08, Bill and Liz <magoo at isp.ca> wrote:
> 
> I’m playing with a KWM2-A which has intermittent drive problems.  After turn-on, it may or may not produce grid current and, if it does, after a few cycles the drive disappears “until next time”.  Drive is always available up to the grid of the driver tube-the intermittent condition is after that.  I can find no blown or damaged components.  The only clue is that when drive is available it starts with a decent reading and then declines fairly quickly to about 1/3 of the initial meter reading.  I have tested the driver tube ; screen and plate voltages are always the proper value.  It is possible that it is a relay problem (driver tube is biased off in receive and switched by K2) but I inspected the relay, cleaned the contacts with paper and NuTrol and even rapped the relay with a screwdriver when drive disappeared, all to no avail.
> 
> I’d hate to recommend to my friend that he replace the relay if the problem may lie elsewhere.  So, until I do that I wonder if anyone may have encountered this problem before or has any suggestion where else to look.
> 
> Bill VE3NH
> 
> PS-I posted some weeks ago about the oscillating regenerative IF in a homebrew receiver.  There was some coupling between input and output...poor building practice (parts laid across the tube socket-I should have seen that before I posted!)....but the real culprit seems to be that the tube has considerably more gain than is necessary and is sensitive to screen voltage (regeneration is in the cathode).  Right now I have the stage working but it still does not go into and out of oscillation as smoothly as I think it should .  So, still working on that one.
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> Message delivered to bluegrassdakine at hotmail.com
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


More information about the Boatanchors mailing list