[Boatanchors] Crystal Set Progress
rbethman
rbethman at comcast.net
Thu Apr 23 18:18:08 EDT 2015
The major difference is that where she lives, I cannot use an outdoor
antenna.
The antenna will be enameled wire wound around a Vertical section of
PVC, with legs to stand it upright.
On one of the legs will be the air variable to tune the antenna.
That will then feed the Galena detector located on the right front
corner where this picture has the antenna clip and the 1N34.
Way at the rear is where the earphone will connect.
Ground will have to connect to the copper plumbing inside their apartment.
Regards, Bob - N0DGN
> On 4/23/2015 2:41 PM, rbethman wrote:
>> I am trying to essentially replicate this:
>>
>> <http://home.comcast.net/~rbethman/xtalset.jpg>
>>
>> The difference is that in lieu of the 1N34, the Galena detector will
>> sit there.
>>
>> Yes, it is beyond necessary, but, I really want to provide her an
>> experience that really sticks.
>>
>> I tend to lean toward overkill in designs and construction.
>>
>> Regards, Bob - N0DGN
More information about the Boatanchors
mailing list