[Boatanchors] Long Threaded Shafts

[Bill Cromwell]

Hi,

If you mean the threaded bushing and not the shaft we might go hunting 
here for parts. What value pot and is it linear or logarithmic taper? 
Power rating? The drive control at least is 4 watts, wire-wound. I would 
have to look at my own Heathkits to verify but I never noticed that they 
are all the same.

Next thing would to fabricate an adapter for a newfangled pot but not 
everybody can do that. So first, lets look for a replacement pot.

73,

Bill  KU8H


On 09/15/2014 11:32 AM, Gary H. Harmon, Jr. wrote:
> The Apache and Mohawk and possibly other Heathkits use pots with a 9/16
> threaded shaft.  The pots available now do not have that amount of threaded
> length.  The original pot is not available.  Has anyone developed a way to
> adapt a current pot to the required 9/16 length needed to get through the
> chassis, panel, etc?
>
>   
>
> Hopefully my question is clear.
>
>   
>
> Thanks in advance.
>
>   
>
> 73,
>
>   
>
> Gary H. Harmon, Jr. - K5JWK - HAM Radio Archaeologist
>
> 6003 Archwood
>
> San Antonio, TX 78239-1504
>
> 210.657.1549h / 210.884.6926c/t
>
> gharmon (at) idworld.net
>
>   
>
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> Message delivered to wrcromwell at gmail.com
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>