[Boatanchors] Where is C32 in the 75A-3?

[David Harmon]

Hi Rob.....

C32 is a fixed mica located in the filter box.
Could you have transposed C23 with it?
C23 is a 20mtr trimmer located under the RF cover.


73

David Harmon
K6XYZ
Sperry, OK

-----Original Message-----
From: Boatanchors [mailto:boatanchors-bounces at mailman.qth.net] On Behalf Of
Rob Atkinson
Sent: Tuesday, October 28, 2014 7:01 PM
To: Boat Anchors List
Subject: [Boatanchors] Where is C32 in the 75A-3?

I'm studying the alignment procedure for the 75A-3, looking at the schematic
and the chassis photos in the manual.  The instructions for the 455 kc
alignment say to peak C32, a trimmer cap that I finally located in a
seemingly out of place part of the set in the mechanical
filter assembly box.   At least that's where it seems to be judging by
the schematic, the only thing I can find it on.   I'd like to know the
physical location of C32--for example, do I need to remove the mechanical
filter box (the thing the two filters seat on to) in order to get to it?
Jeepers.

tnx 73

Rob
K5UJ
______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net
Message delivered to k6xyz at sbcglobal.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html