[Boatanchors] James Millen modulator

[Howard Holden]

So long as the plate impedance of the 90800 is approximately 4800 ohms (give 
or take a bit), yes it should work OK. That will depend on your supplied 
plate voltage to the 90800, and the current. It's explained in the manual 
for the 90831.

http://www.isquare.com/millen/manuals/90831-manual.pdf

Good luck.

Howie WB2AWQ/7






-----Original Message----- 
From: John Saxon via Boatanchors
Sent: Monday, October 06, 2014 11:10 AM
To: boatanchors at mailman.qth.net
Subject: [Boatanchors] James Millen modulator

Question:

Could the Millen 90831 modulator with the 6146s be used to modulate the 
Millen 90800 transmitter with the 807 final?

Thanks,
John
K5ENQ
______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net
Message delivered to holden7471 at msn.com

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html