[Boatanchors] Please review & comment on my Heath Warrior HA-10 amplifier design changes

[Dennis DuVall]

In the 1970 ARRL publication “Single Sideband for the Radio Amateur” pages 134-137 A four 811A linear is described that is almost identical to your Warrior including the neutralizing arrangement and 866A rectifiers.  The grids of the 811As are returned to ground through a separate meter in this design. You could do the same thing returning your grids (bypassed of course) to ground through an appropriate shunt to make your meter read correctly.

Dennis D.  W7QHO
Glendale, CA

***************

> On Nov 22, 2014, at 3:51 PM, Rick Poole WA1RKT <wa1rkt at comcast.net> wrote:
> 
> Per the other discussions we have had on this reflector over the last several days on my Heath Warrior rebuild project, I have made some design changes that I would greatly appreciate if you all would look at and comment on.
> 
> You can see them at http://www.rkt-tech.com/warrior where you will find before-and-after schematics and some explanatory text.
> 
> Any comments you may have, please make them here so others can perhaps benefit from them.
> 
> Thanks...
> 
> Rick WA1RKT 
> Londonderry, NH 
> Catch me on 14.300 MHz Intercon / MMSN most days 
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> Message delivered to duvallddennis at gmail.com
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html