[Boatanchors] Please review & comment on my Heath Warrior HA-10 amplifier design changes

[D C _Mac_ Macdonald]

Right off the bat, I don't see how K1B can work.  I imagine you want it to feed the antenna output directly in the unenergized state.  The moving contact needs to be connected to the RF output! 
  
* * * * * * * * * * * 
* 73 - Mac, K2GKK/5 * 
* (Since 30 Nov 53) * 
* k2gkk hotmail com * 
* Oklahoma City, OK * 
* USAF & FAA (Ret.) * 
* * * * * * * * * * * 
 


 
> Date: Sat, 22 Nov 2014 23:51:41 +0000
> From: wa1rkt at comcast.net
> To: boatanchors at mailman.qth.net
> Subject: [Boatanchors] Please review & comment on my Heath Warrior HA-10 amplifier design changes
> 
> Per the other discussions we have had on this reflector over the last several days on my Heath Warrior rebuild project, I have made some design changes that I would greatly appreciate if you all would look at and comment on.
> 
> You can see them at http://www.rkt-tech.com/warrior where you will find before-and-after schematics and some explanatory text.
> 
> Any comments you may have, please make them here so others can perhaps benefit from them.
> 
> Thanks...
> 
> Rick WA1RKT 
> Londonderry, NH 
> Catch me on 14.300 MHz Intercon / MMSN most days 
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> Message delivered to k2gkk at hotmail.com
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html