[Boatanchors] Diode replacements for 866 tubes, ratings needed?

[KA4INM radio]

From: Rick Poole WA1RKT <wa1rkt at comcast.net>

/*snip*/
That is my big concern.  This amp will be used with CW and SSB, mostly 
SSB, and I remain concerned about that choke-input back-EMF issue; 
reports are that this is most prominent with CW and its full-on, 
full-off mode of operation.  That's why I need to get a handle on how 
many 1KV PIV diodes I need to use in each leg of a full-wave rectifier. 
  The RF Parts 866 solid state replacements are rated at 10 KV PIV (and 
if I recall correctly, isn't the 866 also rated at 10 KV?)
/*snip*/

	866  (RCA)
   PIV = 7,500 Volts
   Peak current = 1.0 Amperes
   Average current = 0.25 Ampere

	866A  (RCA)
   PIV = 10,000 Volts
   Peak current = 1.0 Amperes
   Average current = 0.25 Ampere

-- 
   Ron  KA4INM - Youvan's corollary:
                 Every action results in unwanted side effects.