[Boatanchors] multi conductor cable needed

[Paul Kraemer]

I make up what I need from stock wire I get from Anixter
PVC insulated 600v stranded and gauge / color as required.
I sleeve the wires in a piece of heat shrink tubing that is just large 
enough to house the wires  but do not shrink it.
If you twist the bundle of wires prior to sleeving them (one end clamped in 
vice, other end in vs drill to twist) you will have a very professional 
looking cable
A bit of talcum powder over the wire bundle makes pulling through sleeve a 
lot easier.
When I worked for AEC we made special cables up to 100 ft long that way. 
That's a two person job though.
Paul K0UYA

--------------------------------------------------
From: "John King" <k5pgw at yahoo.com>
Sent: Saturday, January 18, 2014 11:07 PM
To: <boatanchors at mailman.qth.net>
Subject: [Boatanchors] multi conductor cable needed

> I am looking for a source for multi conductor cable to hook up power 
> supplies to  transceivers and/or transmitters. Need cable with at least 
> one 16 or 18 awg  and others for filament and low voltage as needed to 
> hook rigs to HP 23 or other AC supplies to supply power to rigs.
>
> Where can I locate the needed cable? Thanks and 73, John, K5PGW
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html