[Boatanchors] Millen 90651 GDO Problem

[Ray, W4BYG]

Bill,
You didn't mention the model number of your Millen GDO.  

The 90651 schematic does not show the pot you mention.  The 90651-a-5 and
90662-a each have a 15K pot labeled as a sensitivity adjustment.  The pot
drives the base into the SS meter amplifier.  the transistor could be bad.

I do not have any other suggestion as to your problem.  I have a fairly poor
schematic of both models.  They may scan good enough to help you.  I am not
aware of any parts lists being supplied with them.

What model do you have?
73,

Ray, W4BYG

-----Original Message-----
From: boatanchors-bounces at mailman.qth.net
[mailto:boatanchors-bounces at mailman.qth.net] On Behalf Of Bill Stewart
Sent: Wednesday, January 01, 2014 1:24 PM
To: boatanchors
Subject: [Boatanchors] Millen 90651 GDO Problem


Hi all and a Happy New Year,
I tried to use my Millen GDO a few days ago and the meter slams hard to the
left. The 9002 cks w/o any shorts, but is abt half the reading it should be
on a Hickok tube tester...don't have a spare to try. This GDO has a pot on
the left side with a nice chrome knob. It varies the meter reading. The pot
does not show up on the BAMA schematic & looks to be factory installed. 
The s/n is 265. 
  
First, any ideas what the pblm might be and secondly, would anyone have a
schematic & parts list of this model that shows the pot and could send me a
scan. 
  
Tnx, 73 de Bill K4JYS 
 
______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html