[Boatanchors] Need Jones Plug for Hammarlund HX-500 Transmitter - Update

[Al Parker]

Yes, I searched all thru my large stash of edebris, couldn't find 
anything with a pin that would fit.  (That was several yrs ago)
	The 3D copier idea might work, if anyone had a plug to start with.
	I could find no ID on the outside, don't remember if I examine inside.
	I have fabricated smaller plugs using the proper sized wire or flat 
stock for pins, and epoxy for a shell.  Not easy, and doesn't give any 
easy movement for the pins to align themselves when inserted to the socket.
73,

Al, W8UT
www.boatanchors.org
www.hammarlund.info

"There is nothing -- absolutely nothing -- half so much
worth doing as simply messing about in boats"
Ratty, to Mole

On 12/13/2014 11:09 PM, hwhall at compuserve.com wrote:
> Wonder if the original poster, or another HX-500 owner, can check the socket holes against a standard Cinch-Jones plug pin to see if it fits or a different size is required.
>
>
>   Wayne
> WB4OGM
>
>