[Boatanchors] Need Jones Plug

hwhall at compuserve.com hwhall at compuserve.com
Sat Dec 13 23:06:09 EST 2014 

One of the new public libraries constructed here (Colo Springs) has Maker Spaces and a 3D printer but when I asked 3 months ago (just after their open house) about getting time on it was already booked about 4 months out. There are a couple of places that provide a 3D service for hire. The other Maker group is still looking for a permanent home, if I recall right. Too bad Radio Shack missed out on the Maker Movement beginnings.
 

 Wayne
WB4OGM

 

-----Original Message-----
From: Ed via Boatanchors <boatanchors at mailman.qth.net>
To: hwhall <hwhall at compuserve.com>; boatanchors <boatanchors at mailman.qth.net>
Sent: Sat, Dec 13, 2014 12:40 pm
Subject: Re: [Boatanchors] Need Jones Plug


Some towns have 'MAKER' groups   and  there  may be one  near  you  with a 
printer that all share.... join up!
 
Ed#  
 
 
In a message dated 12/12/2014 7:33:44 P.M. US Mountain Standard Time,  
hwhall at compuserve.com writes:

The fly in the ointment may be the  printer itself. The ones I've seen 
weren't cheap. The ones that can be rented  here are booked for months.  


Wayne
WB4OGM



-----Original  Message-----
From: COURYHOUSE <COURYHOUSE at aol.com>
To: hwhall  <hwhall at compuserve.com>; boatanchors  
<boatanchors at mailman.qth.net>
Sent: Fri, Dec 12, 2014 3:03  pm
Subject: Re: [Boatanchors] Need Jones Plug


 
Excellent  Idea Wayne!  
 
This  concept  can be applied to  other   connecters
that  have become unobtainum!
 
Ed   _www.smecc.org_ (http://www.smecc.org/)  
 
 
In a message dated 12/12/2014 12:32:00 P.M. US Mountain Standard Tim, 
_hwhall at compuserve.com_ (mailto:hwhall at compuserve.com)  writes:

Might  also be a 3-D printer project to make the insulated parts (using ABS 
or  similar hard plastic) and rob the pins from garden variety  plugs?


Wayne
WB4OGM



-----Original  Message-----
From: hwhall <_hwhall at compuserve.com_ (mailto:hwhall at compuserve.com) >
To:  boatanchors <_boatanchors at mailman.qth.net_ 
(mailto:boatanchors at mailman.qth.net) >
Sent:  Fri, Dec 12, 2014 12:12 pm
Subject: Re: [Boatanchors] Need Jones  Plug



I imagine one could cobble up a pair of pin strips,  simulating the plug 
with 
two narrow plugs, by cutting down a big plug  like this one:

_http://i.ebayimg.com/20/!B7I31DQEWk~$%28KGrHqZ,!jYEzKEH,tV%29BMzZfjR6+Q~~-1
_1.JPG_ 
(http://i.ebayimg.com/20/!B7I31DQEWk~$(KGrHqZ,!jYEzKEH,tV)BMzZfjR6+Q~~-1_1.JPG) 

Wayne

WB4OGM



-----Original  Message-----
From: Al Parker <_anchor at ec.rr.com_ (mailto:anchor at ec.rr.com) >
To: Gary H.  Harmon, Jr. <_gharmon at idworld.net_ 
(mailto:gharmon at idworld.net) >; BOATANCHORS1  LIST 
<_boatanchor at theporch.com_ (mailto:boatanchor at theporch.com) >;  
BOATANCHORS2 LIST <_boatanchors at mailman.qth.net_ (mailto:boatanchors at mailman.qth.net) 

>;  
Boatanchors3 List <_boatanchors at puck.nether.net_ 
(mailto:boatanchors at puck.nether.net) >
Cc:  Heathkit3 LIST <_heathkit at yahoogroups.com_ 
(mailto:heathkit at yahoogroups.com) >;  Heathkit_HFAmps 
<_Heathkit_HFAmps at yahoogroups.com_ (mailto:Heathkit_HFAmps at yahoogroups.com) 
>;  Heathkit2 <_heathkit at mailman.qth.net_ (mailto:heathkit at mailman.qth.net) 
>
Sent:  Fri, Dec 12, 2014 11:45 am
Subject: Re: [Boatanchors] Need Jones  Plug


Hi Gary,
I don't think that connector is  used on anything else.  And you'd like 
2 of them?  I'd be  happy to have one for my HX-500, I've been on the 
lookout for one for  6-8 yrs.  If you find a source, there are several 
HX-500 owners out  there who would like one.
73,
Al, W8UT
_www.boatanchors.org_ (http://www.boatanchors.org/) 
_www.hammarlund.info_ (http://www.hammarlund.info/) 

"There is nothing -- absolutely  nothing -- half so much
worth doing as simply messing about in  boats"
Ratty, to Mole
On 12/11/2014 10:54 PM, Gary H. Harmon, Jr.  wrote:
> Looking for two male Jones plugs for a Hammarlund HX-500  transmitter.  
The
> plug has two rows of seven pins each; seven  are horizontal and seven are
> vertical.  The size is  approximately 2 1/8 inches by 11/16 inches.  The
> Hammarlund  parts number is no help.  Any leads, info, actual part number
>  would be greatly  appreciated.
>
______________________________________________________________
Boatanchors  mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help:  http://mailman.qth.net/mmfaq.htm
Post: _mailto:Boatanchors at mailman.qth.net_ 
(mailto:Boatanchors at mailman.qth.net?) 
Message  delivered to _hwhall at compuserve.com_ 
(mailto:hwhall at compuserve.com) 

List  Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at  usol.com **


This list hosted by: _http://www.qsl.net_ (http://www.qsl.net/) 
Please  help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
Boatanchors  mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help:  http://mailman.qth.net/mmfaq.htm
Post: _mailto:Boatanchors at mailman.qth.net_ 
(mailto:Boatanchors at mailman.qth.net?) 
Message  delivered to _hwhall at compuserve.com_ 
(mailto:hwhall at compuserve.com) 

List  Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at  usol.com **


This list hosted by: _http://www.qsl.net_ (http://www.qsl.net/) 
Please  help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
Boatanchors  mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help:  http://mailman.qth.net/mmfaq.htm
Post: _mailto:Boatanchors at mailman.qth.net_ 
(mailto:Boatanchors at mailman.qth.net?) 
Message  delivered to _couryhouse at aol.com_ (mailto:couryhouse at aol.com) 

List  Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at  usol.com **


This list hosted by: _http://www.qsl.net_ (http://www.qsl.net/) 
Please  help support this email list: http://www.qsl.net/donate.html






______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net
Message delivered to hwhall at compuserve.com

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

More information about the Boatanchors mailing list