[Boatanchors] HC-6/U Crystal Needed

[Glen Zook via Boatanchors]

The crystals for 22.000 MHz are the much smaller size and cannot take as much crystal current as the larger HC49/U crystals.  That is why I hesitate to use them in tube type equipment.

However, they are cheap enough and if the crystal does go bad, the pocket book won't be hurt.
 
Glen, K9STH 

Website:  http://k9sth.net


On Friday, August 15, 2014 8:32 PM, D C _Mac_ Macdonald <k2gkk at hotmail.com> wrote:
 


On the basic Mouser page listed by Glen Zook, there are 3 each 22 MHz, 18 pF crystals in stock.

* * * * * * * * * * * 
* 73 - Mac, K2GKK/5 * 
* (Since 30 Nov 53) * 
* k2gkk hotmail com * 
* Oklahoma City, OK * 
* USAF & FAA (Ret.) * 
* * * * * * * * * * * 




> From: bluegrassdakine at hotmail.com
> Date: Fri, 15 Aug 2014 19:42:12 -0500
> To: gzook at yahoo.com
> CC: boatanchors at mailman.qth.net
> Subject: Re: [Boatanchors] HC-6/U Crystal Needed
> 
> Try Brian Carling your online list member at
> 
> http://af4k.com/FT243_CRYSTALS_Originals.htm
> He has other rocks on his site. This is only address I have
> 
> 
> 
> ======================
> Limit all politicians to two terms.
> One in office, and one in prison.
> It works: Detroit and Chicago 
> already do this.
> ======================
> 
> > On Aug 15, 2014, at 15:04, "Glen Zook via Boatanchors" <boatanchors at mailman.qth.net> wrote:
> > 
> > There don't seem to be any readily available clock crystals for 22.000 MHz.  However, there are 11.000 MHz clock crystals available.  I use the 11.000 MHz crystals in many tube-type 6-meter converters and they double to 22.000 MHz and work fine.
> > 
> > I get my converter crystals from Mouser and they are pretty cheap:
> > 
> > http://www.mouser.com/ProductDetail/Fox/FOXLF111-20/?qs=%2fha2pyFadugcl1fSypX75lmAO%252bk9XH8dQX4bL4HYPWfTcYNid4UkCw%3d%3d
> > 
> > 
> > 
> > Glen, K9STH 
> > 
> > Website:  http://k9sth.net
> > 
> > 
> > On Friday, August 15, 2014 1:41 PM, Richard Solomon <w1ksz at earthlink.net> wrote:
> > 
> > 
> > 
> > I bought a Johnson 6N2 Converter "over there" and found that the 6 Meter LO
> > Xtal had been pinched. It looks like the 2 Meter Xtal was changed out to 
> > shift
> > the IF up to 28 MHz.
> > 
> > So, I need a 22 MHz Xtal for the 6 Meter LO. Anyone have one I can get ??
> > 
> > Tnx es 73, Dick, W1KSZ
                          
______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net
Message delivered to gzook at yahoo.com

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html