[Boatanchors] Crystal Current

[Brian Carling]

That is correct. Common practice is to put a 6.3 V 60 mA lamp in series with the Crystal. A good indication of the current will be shown by the brightness of the bulb.

Best regards - Bry Carling



> On Apr 27, 2014, at 4:33 PM, "Jim Wilhite" <w5jo at brightok.net> wrote:
> 
> I am not sure what the current should be but if too much is applied you can create parasitic oscillations you don't want.
> 
> Jim
> W5JO
> 
> 
> -----Original Message----- 
> 
> The 1952 - 1962 ARRL Handbooks  recommend crystal currents be held to
> 40ma max and preferably less.
> While the FT-243 type is not mentioned specifically these were in
> widespread use at that time.   HC-6/U
> types should probably be held to something less than that....
> 
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html