[Boatanchors] Voltage Sequencing on 807s

[J. Forster]

Thank you,

-John

================


> John
> Make sure never to have screen voltage applied without  similar or higher
> on
> the anode first- and as you already have bias on grid one- all should be
> fine.
> DaveB, NZ
>
> ----- Original Message -----
> From: "J. Forster" <jfor at quikus.com>
> To: <ARC5 at mailman.QTH.net>; <boatanchors at mailman.QTH.net>;
> <boatanchors at puck.nether.net>
> Cc: <ArmyRadios at yahoogroups.com>; <Milsurplus at mailman.QTH.net>
> Sent: Saturday, October 19, 2013 11:21 AM
> Subject: [Boatanchors] Voltage Sequencing on 807s
>
>
>> I'm looking at testing some 807s, which seems pretty straight forward.
>> And, no, I don't have a tube tester available.
>>
>> Obviously, the heater and control grid get powered first, but what about
>> the screen and plate? Or does it even make any significant difference?
>>
>> My original intention was to use a (decoupled) divider off B+ for the
>> screen, but at the moment, I'm inclined to use a separate supply.
>>
>> -John
>>
>> ==============
>>
>> ______________________________________________________________
>> Boatanchors mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Boatanchors at mailman.qth.net
>>
>> List Administrator: Duane Fischer, W8DBF
>> ** For Assistance: dfischer at usol.com **
>>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>