[Boatanchors] 1 kV Ceramic Caps- Your Choice?

[Rob Atkinson]

These are disc ceramic RF caps?  What values?

If this is for a TVI type LPF (passes below 30 mc) I wouldn't bother.
After the switch to digital TV, cable TV, cell phones, etc. there's
pretty much nothing above 30 mc to interfere with.  Around 2 or 3
years ago I pulled out my TVI filter (by the way, few of them can
handle AM) and scrapped it for parts.  No problems at all.

Unfortunately, there's A LOT out there that interferes with ME, or
rather, my ham gear.

73

Rob
K5UJ

On Sat, Mar 16, 2013 at 3:09 PM, David Stinson <arc5 at ix.netcom.com> wrote:
> Getting ready to rebuild a 50-Ohm low-pass filter board.
> I need *reliablity.*  No more surplus Chinese junk.
> Looking for the "good" 1st-run Chinese junk ;-).
> I can buy the 1 kV ceramics from four different vendors:
>
> TDK Corporation
>
> Vishay BC
>
> Panasonic Electronic
>
> Murata Electronics
>
> I know some like Vishay.
> Anyone else have recommendations?
>
> 73 DE Dave AB5S
>
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html