[Boatanchors] Black wrinkle paint

[Mark Foltarz]

Napa Auto parts sells a Plasticote product ( more FB from Ohio)
I think about $8 for a can.
Practice first on some test metal.
NO PRIMER - Primer will inhibit wrinkling
Watch your temp when setting up the wrinkle - too much heat and you drive off the agent with little or no wrinkle
Not enough heat and no wrinkle
Two coats sprayed at correct time interval as indicated on can.
Surface must be smooth - any deep scratches will  serve as starting point for wrinkle pattern and stand out.
Let the stuff cure - seriously, the wrinkle paint takes a long time to set up. Give it a couple of weeks on the shelf before putting  it back on the radio.

Etc

de KA4JVY

Mark






>________________________________
> From: Ronnie Hull <w5sum at comcast.net>
>To: "<boatanchors at mailman.qth.net>" <boatanchors at mailman.qth.net> 
>Cc: National Radio Equipment <national at mailman.qth.net> 
>Sent: Thursday, June 13, 2013 9:54 AM
>Subject: [Boatanchors] Black wrinkle paint
> 
>
>Howdy men
>Where is a good source for black wrinkle paint? I refuse to pay the local Harley Shop $29 for one can
>
>Sent from Ronnie's IPhone
>______________________________________________________________
>Boatanchors mailing list
>Home: http://mailman.qth.net/mailman/listinfo/boatanchors
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Boatanchors at mailman.qth.net
>
>List Administrator: Duane Fischer, W8DBF
>** For Assistance: dfischer at usol.com **
>
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>
>
>