[Boatanchors] modulation transformer for Viking 1 or Viking II

[L L bahr]

Good job, Larry!  Yes the audio chain in a Viking II is very marginal.

Lee, w0vt

----- Original Message -----
John,

I just rebuilt my Viking II audio chain using a Hammond A124 that i bought from Mouser for $27.  I also reworked the whole audio chain up to the 807 inputs which is where the A124 transformer hooks to.  I redrilled the holes where the 6AU6 tubes were and put in 9 pin sockets for a 12AX7 and 12BH7 driving the A-124 transformer.  All new components.  Audio reports are excellent with lots of audio to go.  The circuit came from July 1954 QST, Hinks and Kinks page 39.

Took some time but well worth it.

Larry
W0OGH






From: John King <k5pgw at yahoo.com>
To: boatanchors at mailman.qth.net
Sent: Fri, 05 Jul 2013 16:44:20 -0400 (EDT)
Subject: [Boatanchors] modulation transformer for Viking 1 or Viking II

Anyone have a modulation transformer for a Viking I or Viking  2 ?  Please email me direct if you have one. Thanks and 73, John, K5PGW
______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html