[Boatanchors] OT: Free Schtuff

[Bill Cromwell]

Hi Brian,

I have a couple of bridges that might do what you need. I'll dig them 
out and let you know. Do you have the physical dimensions? It won't work 
if there isn't enough room on the rig.

73,

Bill  KU8H


On 12/10/2013 06:15 PM, Brian Harris wrote:
> I have more of the components listed below than I will ever use so i am having a Christms giveaway?  To be sure I have enough to go around, I would like to limit the quantity of any particular component to ten but I am open to increasing that number if it is for a good cause.  While I have your attention I am in dire need of a high current diode bridge to fix an amplifier.  It's a D5FB20, which is 5A/200V bridge with a heat sink attached.  This diode was made by Shindengen.
>
> Semiconductors:
> Motorola MR502 3A/200V single axial lead diode 7948 date code
>
> Resistors:
> 1.8K 1/4W
> 100 RN55
> 27 1/2W
> 750 1/8W
> 9.53K RN55
> 392 RN55
> 20K 1/4W
> 511 RN55
> 100 1/4W
> 1M 1/4W
>
> Note: RN55 denotes 1/8W metal film resistor
>
> Inductor:
> 6.1uH 1.5 Ohm about size of 1/4W resistor (mil spec)
>
> Tell me what components you want and I will put them in a standard envelope for First Class Mail to you.   Sorry, no foreign addresses.   I would appreciate a Paypal payment of $1.00 to cosmophone at yahoo.com to help defray expenses.  If you want ten each of more than six types please make the payment $2.00.
>
> One more thing, I have a bunch of electrolytics on a reel that are marked:
> 39003
> 01-K
> 2350J
> +245C
> NC
>
> They measure about 0.5uF on a calibrated Eico bridge.  Comments?  Want some?  They are probably low voltage as they are about 1/2W resistor size.
>
> Merry Christmas
>
> Brian Harris WA5UEK
>