[Boatanchors] DX100 accesory socket

[Rich Yost]

Ronnie,

There are no jumpers needed in the Remote Socket for the dx-100 to work
I have 4 in operation all with the remote socket being used for the remote switch, but it should work just fine without anything in the socket ( unlike Rangers )
the dx-100 schematics are on the web in pdf & jpgs, I can send you one if you need one.

Rich
n2ry




On Thursday, December 5, 2013 9:25 AM, Roland Hull <w5sum at comcast.net> wrote:
 
Alright men, I need some help here, I have only a partial manual for a dx100 with no schematic in it. Currently I can't seem to download squat, guess comcast is playing  up again.

So what I need to know is this.  Are there jumpers that have to be in place on the accessory socket for the rig to work. Most rigs do.

The manual references a 'remote b+ switch' using four contacts on that accessory plug but it doesn't clearly state if jumpers have to be there for the rig to work if not using a remote switch.

My DX100 has no grid drive at all.. n uttin..

I have plate voltage when the B+ switch is switched at the front panel.

all tubes check good.

Thanks in advance and 73's

Ronnie W5SUM
______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html