[Boatanchors] [Amps] SB 200 problem

[rbethman]

I'm not sure, but an old 1N60 from an old CB Field strength/SWR bridge 
would do the job very well.

Many older SWR/Wattmeters used them.  Probably a Heath AM-1 or such.

Bob - N0DGN

On 5/4/2012 10:57 AM, RAY FRIESS wrote:
>
> If it turns out to be a bad diode, and I cant gind a germanium, can I use a regular power supply type diode to replace it? Date: Fri, 4 May 2012 07:55:45 -0700
> From: gzook at yahoo.com
> Subject: Re: [Amps] SB 200 problem
> To: rayfrijr at msn.com; amps at contesting.com; boatanchors at mailman.qth.net
>
> Check the germanium diode that provides the voltage for the "forward" or, in this case, the power output, indication.  There are 2-diodes, 1 for forward and 1 for reverse (SWR position).  It sounds like the forward diode is bad.  Very common!
> Also, clean the meter switch. Glen, K9STH
>
> Website:  http://k9sth.com
>          From: RAY FRIESS<rayfrijr at msn.com>
>   To: amps at contesting.com; boatanchors
>   <boatanchors at mailman.qth.net>; FLBOATANCHORS<flboatanchors at yahoogroups.com>
>   Sent: Friday, May 4, 2012 9:30 AM
>   Subject: [Amps] SB 200 problem
>
>
>
>
>
>
> I have a Heath SB 200 amp that is working fine with one exception.   The meter is not functioning in the power out position.It reads fine for high voltage, grid, and SWR functions, just not for power output.   I have to use an external wattmeter to tuneupand check power output. I thought it might be just my amp until the other day when I was at a ham friends of mine, and he told me he had the same problemwith his SB 200. Anyone else had this problem and know what to do to fix it?
>
>       		 	   		
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>