[Boatanchors] Globe Electronics V-10 VFO

[Jim Wilhite]

Is your 755 VFO giving touble?  I have a GK 500A and use a 755 and a 
755A VFO with it.  If you have low drive you may be using a piece of 
coax too long to reach the RCA connector for VFO input.  Are you using 
RG 58 or 59?  If so that will attenuate the signal from the VFO.

Jim/W5JO


----- Original Message ----- 
>
>
> So it is very appropriate that I use this VFO with my Globe King 500A. 
> A
> big improvement over the matching 755 VFO.
>
> i wasn't quite sure that the Globe of WRL was the same as Globe
> Electronics, now I know. My doubts were enhanced by the fact that the
> V-10 VFO manual, copyright 1961, is from Globe Electronics, Division 
> of
> GC-Textron Electronics, /I/
> -- 
> *Charles Ring W3NU*
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>