[Boatanchors] Dial Tape Info needed for ITT Mackay 3010C

[Raymond Cote]

Hi Michael!  Your message reminds me that I have not checked my 3010 in years. The tape is so rare that I would hate. To try and find one.  I will get my radio out of storage soon as possible to check it out. Good luck with yours. Be very careful. 

Quality Electrons - I employ only topgrade, high-quality electrons in every one of my radios. 
All electrons used by me must meet minimum electromagnetic and physical guidelines as follows:
charge = (4.80294±0.00008)x10E-10 absolute electrostatic units (AEU), 
dia = (1±1.99978)x10E-10 cm, rest mass =
(0.9109534±.33528)x10E-30 kg, with a magnetic moment of no greater than, and no lesser than,
(9.284832±23.5554673)x10E-24    

Sent using steam power. 

On Aug 27, 2012, at 17:29, "Michael, W1RC" <subs at w1rc.net> wrote:

> Hi Gang:
> 
> Does anyone have any experience working on the frequency readout tape 
> drive on the ITT Mackay 3010C receiver?  I have one that is a bit 
> sticky and the spools are a bit sluggish.  The manual doesn't mention 
> anything about working on the display tape.  I want to clean and 
> lubricate the drive/spools and would rather not re-invent the wheel 
> in the process.
> 
> TIA,
> 
> Michael, W1RC
> 
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com ** 
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html