[Boatanchors] Riveting in Collins radios

[D C *Mac* Macdonald]

We had probably over 40 of the AN/FRC-93 or AN/FRC-153 (IIRC)
suitcase stations in the 3d Combat Comm Sq when I was the OIC.
The transceivers were used with the PM-2 (?) power supply that
mounted on the back of the transceiver. They were connected
and disconnected all the time and were somewhat of a problem.

I would definitely recommend a few feet of RC-58 w/ RCA plug
on one end and PL-259 plus PL-258 (double female barrel) to
reduce that strain on the transceiver's connector.
 
I believe I have seen reports published stating that the ceramic
type RCA phono jacks have virtually no more loss than either the
PL-259 or BNC connectors.

* * * * * * * * * * *
* 73 - Mac, K2GKK/5 *
* (Since 30 Nov 53) *
* Oklahoma City, OK *
* USAF, Ret (61-81) *
* * * * * * * * * * *
 


> Date: Wed, 6 Apr 2011 09:26:31 -0700
> From: gzook at yahoo.com
> To: yonglee at yonsei.ac.kr; jbrannig at verizon.net; collinsradio at comcast.net
> CC: boatanchors at mailman.qth.net
> Subject: Re: [Boatanchors] Riveting in Collins radios
> 
> That raises the question as to why the connection is constantly being connected and disconnected. In most amateur radio installations of the Collins S-Line that I know of, the equipment is set in place and usually stays there for years.
> 
> Even when the UHF series is used (PL-259 / SO-239), repeated connecting and disconnecting is going to result in problems. Usually, the center connection on the SO-239 loosens and doesn't make good contact. However, over the years I have seen numerous occasions where the insulation on the SO-239 has been broken. In most of these I am pretty sure that a large diameter cable, like RG8/U or RG213/U has been connected and then the cable is moved around. I see this mainly on receivers.
> 
> In the case of the RCA connectors, if someone uses an adapter (like the Radio Shack BNC or UHF to Motorola which definitely works with RCA connectors) are used, then it is pretty easy to break the insulation because of the leverage when the cable is moved. But, when a proper RCA phono plug attached to RG58/U coaxial cable is used then there is not a problem.
> 
> Again, the problems with the insulators of RCA jacks is normally caused by trying to use cables with some sort of adapter.
> 
> Glen, K9STH
> 
> Website: http://k9sth.com
> 
> 
> --- On Wed, 4/6/11, David Knepper <collinsradio at comcast.net> wrote:
> 
> Glenn, the problem with the RCA connector as you well know is that the porcelain cracks from constant abuse - in and out. Then, where are you as they say.
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com ** 
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html