[Boatanchors] [Hallicrafters] Hallicrafters SR 160 tri-bander question

[Duane Fischer, W8DBF]

You might try using the "live" Tech Help available from the Hallicrafters 
web site: www.w9wze.net

Good luck OM!

----- Original Message ----- 
From: "Greg Mijal" <bluebirdtele at embarqmail.com>
To: <Hallicrafters at mailman.qth.net>
Cc: <boatanchors at mailman.qth.net>
Sent: Friday, November 05, 2010 12:55 PM
Subject: [Hallicrafters] Hallicrafters SR 160 tri-bander question


> Hi:
>
> I'm finishing up a re-build on a Halli SR 160 tri-band transceiver.  I 
> noticed that the radio requires a jumper plug in at the VOX accessory 
> socket at the rear of the radio.
> Otherwise the mic audio is disabled into the balanced modulator.
> The manual I downloaded from BAMA is impossible to read completely and my 
> request is for someone with a clear schematic to tell me where the jumpers 
> go at the VOX accessory plug or ohm out the jumper plug on your SR 160. 
> The answer may also be in the schematic for the HA 16 VOX accessory 
> schematic.
> Thank you
> Greg
> WA7LYO
> Kinston NC
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hallicrafters at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -- 
> Internal Virus Database is out-of-date.
> Checked by AVG.
> Version: 7.5.557 / Virus Database: 270.12.4/2081 - Release Date: 4/26/2009 
> 9:44 AM
>
>