[Boatanchors] Late model Heath SB-220 question

[Carl]

SB-220's have the input coils up front behind the panel and all had 10M as 
well as a bandswitch panel marking.

The SB-221 did not have a 10M indicator on the panel marking. Some built by 
Heath stores had 10M, others required a parts kit.

Carl
KM1H


----- Original Message ----- 
From: "rbethman" <rbethman at comcast.net>
To: <Wa4uso at aol.com>
Cc: <boatanchors at mailman.qth.net>
Sent: Tuesday, March 16, 2010 6:19 PM
Subject: Re: [Boatanchors] Late model Heath SB-220 question


> Darrell,
>
> Look on the rear of the amp where the tuned inputs are.
>
> If one of the holes is empty, the 10 mtr mod isn't there!
>
> Bob - N0DGN
>
> On 3/16/2010 6:07 PM, Wa4uso at aol.com wrote:
>> I have pulled a late model Heath SB-220 out of storage for possible use. 
>> I
>> have not done a lot of research on this model, but how can I tell 
>> (without
>> powering the amp up) if the 10 meter kit has been installed. Your 
>> comments
>> are appreciated.
>>
>> 73 de WA4USO Darrell Darby
>
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html