[Boatanchors] Harris RF-301 Transceiver Problems

[manualman at juno.com]

Check the simple things, plate voltage, plate current, screen voltage;
power supply putting out what it's suppose to put out when transmitting,
etc.

Pete, wa2cwa
 
On Sat, 31 Jul 2010 13:50:14 -0700 David Hollander <n7rk at cox.net> writes:
> I have a Harris RF-301 transceiver that has some problems.
> 
> The receiver is working fine but the transmitter is only putting out 
> a 
> couple of watts. For a basic check, I have checked the three 
> 6146B's, 
> the 12BY7 driver and the 6DC6 and they are all good.
> 
> This has put out full power (near 100 watts) in the past but I have 
> not 
> used it in a few years. Set it up yesterday and the output is barely 
> a 
> couple of watts. The transmit audio is fine when listening on 
> another 
> receiver.
> 
> Any suggestions would be much appreciated? I do have the manual. 
> Does 
> anyone know of anyone who works on these radios? This is a very 
> complex 
> radio.
> 
> Tnx and 73,
> 
> Dave N7RK
> 
> -- 
> ***********************************************************
> Dave  N7RK          Boatanchors Home Page: 
> http://members.cox.net/n7rk
> Phoenix, Arizona         *DXCC Honor Roll*    *WAZ#22 - 75 Meter 
> SSB*
> 
> ex-XE2/N7RK, N7RK/ZB2, VK2ERK, ZM0AJN, WB6NRK, WN6IWX
> 
> Boatanchor and Antique Radio Collector
> 
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com ** 
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>