[Boatanchors] tube tester readings

[Carl]

Only in Siemens Land (-;  Thankfully all the truly great reference books 
still use the old way.

Carl
KM1H



The term Mhos ( 1/Ohms ) has not been in use in several decades. The Mho was
changed to
The Siemens.

Regards and 73....Price WØRI



>
> Transcoinductance is:
>
> Change in Plate Current / Change in Grid Voltage
>
> The units of measure are reciprocal Ohms (1/Ohms) also called Mhos
>
>
>
>> Ok, this may seem like a duh to some, but on my B&K Dyna-jet tube
>> tester, the meter is scaled numerically from 1-120 but I have no idea
>> what the reference quantity means. The REPLACE-REJECT-GOOD markings
>> are not too much for my small brain. I know this is a mutual
>> conductance tester and I know what that means but have no idea how
>> this scale translates to that.
>>
>> Another unknown is regarding dual section tubes. The chart shows a
>> test 1 and test 2 but no reference in the manual as to which section
>> of the tube is which.
>>
>> Please enlighten me.
>>
>> Thanks and 73, Dick KF4NS
>> St Petersburg, FL 33714 USA
>> Keep The Glow!
>
>
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html