[Boatanchors] Heathkit HW101 Rx problem

[The Pollacks]

It seems that there was a fix for this a long time ago, involving using an
extra relay contact to ground something.  If you don't find it or cure it,
I'll see if I can locate it.

Ron K2RP

-----Original Message-----
From: boatanchors-bounces at mailman.qth.net
[mailto:boatanchors-bounces at mailman.qth.net] On Behalf Of Dick KF4NS
Sent: Thursday, August 12, 2010 1:20 PM
To: cwdx.hk1n at gmail.com
Cc: boatanchors at mailman.qth.net
Subject: Re: [Boatanchors] Heathkit HW101 Rx problem

Jim,
You will receive several good ideas but what worked for me after the 
hams at Heath could not resolve it for me was to put a diode in the 
screen supply of the finals. It is called secondary emission.
Good luck and 73, Dick KF4NS
St Petersburg, FL 33714 USA
Keep The Glow!

-----------------ORIGINAL MESSAGE-------------
Message: 4
Date: Thu, 12 Aug 2010 08:24:57 -0500
From: Jaime Gomez <cwdx.hk1n at gmail.com>
Subject: [Boatanchors] Heathkit HW101 Rx problem
To: boatanchors at mailman.qth.net
Message-ID:
<AANLkTinLm0nwFpM+zwbZFOKf5xZ2BC8edp4hTeAhF5zD at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

I am repairing a Heathkit HW-101, it is transmitting and receiving OK 
after
electrolytics replacement and rig alignment. Now I have delay for the
receiver to recover after transmitting. The manual says to check D101, 
it is
OK. I wonder if anybody has experienced this problem before?
Thank you, 73,

-- 
Jim, HK1N

______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com ** 


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html