[Boatanchors] 75A-4 Reduction Knob Problem

[Joe Eide]

Hi Richard,

There are 2 set screws that hold the 4:1 knob onto the 4:1 gear set.  
They are Bristol screws so you will need an Xcelite #62 or equivalent.

Joe _ KB9R



Richard W. Solomon wrote:
> A friend gave me a 75A-4 to work on and one problem I see is in the
> 4:1 Reduction Knob. You can tune one way, but when you reverse the
> tuning it takes a few turns of the knob before it engages the tuning
> shaft. 
> Is it safe to assume the one small screw opening I see on the knob is
> for removal ? Never having worked on one of these I will need 
> guidance before proceeding.
>
> Thanks for any help,
>
> 73, Dick, W1KSZ
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com ** 
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>   
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.421 / Virus Database: 270.14.9/2428 - Release Date: 10/11/09 06:39:00
>
>