[Boatanchors] !/4" Phone Jack - 2 Circuit Needed

[Rod Hogg]

Radio Shack 274-312B for the 1/4" jack, Chinese made, but not all that bad
of quality in the "B" version, is Tip ring sleeve stereo jack.
274-1546 for the Tip Ring Sleeve 1/4" plug, metal housing and spring strain
relief.  Not too bad either.

Rod
KØEQH


-----Original Message-----
From: boatanchors-bounces at mailman.qth.net
[mailto:boatanchors-bounces at mailman.qth.net] On Behalf Of Glen Zook
Sent: Friday, October 09, 2009 6:42 PM
To: boatanchors at mailman.qth.net; Richard W. Solomon
Subject: Re: [Boatanchors] !/4" Phone Jack - 2 Circuit Needed

If all else fails, there is always Radio Shack.  Virtually all plugs and
jacks are made in China today.  However, I have had pretty good luck with
those from Radio Shack.


--- On Fri, 10/9/09, Richard W. Solomon <w1ksz at earthlink.net> wrote:

Anyone have any of the old 2 circuit phone jacks ? Like the Switchcraft type
that contact Tip, Ring & Sleeve.
 
I picked up a couple of BY manufacture ones and what pieces of
"you-know-what".
 
I need one, but could use two. I am adding a PTT circuit to my Viking II.