[Boatanchors] Re:part needed

[Bob Macklin]

And see if this works:
http://www.alliedelec.com/Search/SearchResults.aspx?N=0&Ntk=Primary&Ntt=%22shaft+lock%22&sid=11E993ABC613

Bob
K5MYJ
----- Original Message ----- 
From: "Bob Macklin" <macklinbob at msn.com>
To: "Jim Wilhite" <w5jo at brightok.net>; "'Boatanchors Mail List'"
<boatanchors at mailman.qth.net>
Sent: Friday, January 02, 2009 7:30 PM
Subject: Re: [Boatanchors] Re:part needed


> Allied Electronics has several available. Here is page of Keystone stuff.
> Scroll down until you find the shaft locks.
>
>
http://www.alliedelec.com/Images/Products/Datasheets/BM/KEYSTONE_ELECTRONICS/KEYSTONE-ELECTRONICS_ENCLOSURE-AND-COOLING_8390283.PDF
>
> Bob
> K5MYJ
> ----- Original Message ----- 
> From: "Jim Wilhite" <w5jo at brightok.net>
> To: "'Boatanchors Mail List'" <boatanchors at mailman.qth.net>
> Sent: Friday, January 02, 2009 7:13 PM
> Subject: Re: [Boatanchors] Re:part needed
>
>
> > The old Allen Bradley pots are still made by NTE Electronics.  You
> > can order them from Allied or Mouser and I suspect Newark.  They are
> > not in the catalogs but if you will call or email Mouser's tech
> > help, they will provide a link to the specifications page.
> >
> > They have the screwdriver adjust type, the short shaft and the long
> > shaft type for sale.  They also, when I needed one, had the lock nut
> > type with either type of shaft.  I bought a couple of the short
> > screwdriver w/ locknut for a project about a year ago.
> >
> > Jim/W5JO
> >
> > ----- Original Message ----- 
> >
> >
> >
> > > I've got a HB power supply with pots that have short solid shafts
> > > and a screwdriver slot on the end.  You can't change the setting
> > > without a screwdriver.  The shafts stick out of the panel about
> > > 1/2" including the nut and washer.  Maybe you could track
> > > something down like that?
> > >
> > > 73,
> > > Tom NØJMY.  .
> >
> > _______________________________________________
> >
>
> _______________________________________________
>