[Boatanchors] Heathkit SB-620

[Dave Brown]

The R7000 IF out is nominally 10.7 but  is at a very low level and 
wideband. So you will probably need some gain in whatever you build to 
ensure correct operation of the 620. I dont know what input level 
range it needs but the R7000 IF out is close to input signal 
level-little or no overall gain in the receiver to that point.
73
Dave, ZL3FJ


----- Original Message ----- 
From: "David" <maxtaz at shaw.ca>
To: <Boatanchors at mailman.qth.net>
Sent: Thursday, February 19, 2009 8:01 AM
Subject: [Boatanchors] Heathkit SB-620


> Greetings. Since I got no response on the Heathkit list, I will try 
> here. I
> have a SB620 that I would like to hook up to a R7000 that has a 10.7 
> meg IF
> output. The 620 is set up for 6000kc range at the present time. Has 
> anyone
> used one on the R7000 and if so what type of interface did you use.
>
> Thanks for any info.
>
> Dave   VA7DG
>
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html