[Boatanchors] shielded audio pair - twist and shout.

[JOHN M IVERSON]

HI as the 2A3s are running class A or close to it, the power required is
that lost in the transformers and connections.
class A does not draw grid current.
jack


On Wed, 19 Nov 2008 17:58:56 EST WA5CAB at cs.com writes:
As I said early in this thread, the 500 ohm line is connected to pins 6
and 7 of the octal plugs.  Pin 7 is tied to chassis in BC-614-A through
-E.  In the BC-610-E, pin 7 is not grounded.  The pair of wires from 6
and 7 to the 500 ohm winding on the input transformer (which drives
push-pull 2A3's, not the 100TH's) are shown as shielded with the shield
tied to pin 8.  Pin 8 is grounded in both the BC-610 and BC-614.

In a message dated 11/19/2008 4:06:47 PM Central Standard Time,
blimpboy at sonic.net writes: 

When in doubt... consult the manual... see what they did on the original.



Robert Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480 
____________________________________________________________
Click for free info on college degrees.
http://thirdpartyoffers.juno.com/TGL2141/fc/PnY6rw1U6Se9VBYQwt03ZMAeiO1KAxYaaQYWW86IXnfi3RJSqGcfv/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/boatanchors/attachments/20081120/ef021e13/attachment.htm