[Boatanchors] shielded audio pair - twist and shout.

[WA5CAB at cs.com]

As I said early in this thread, the 500 ohm line is connected to pins 6 and 7 
of the octal plugs.  Pin 7 is tied to chassis in BC-614-A through -E.  In the 
BC-610-E, pin 7 is not grounded.  The pair of wires from 6 and 7 to the 500 
ohm winding on the input transformer (which drives push-pull 2A3's, not the 
100TH's) are shown as shielded with the shield tied to pin 8.  Pin 8 is grounded 
in both the BC-610 and BC-614.

In a message dated 11/19/2008 4:06:47 PM Central Standard Time, 
blimpboy at sonic.net writes: 
> When in doubt... consult the manual... see what they did on the original.
> 

Robert Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/boatanchors/attachments/20081119/537991e3/attachment.htm