[Boatanchors] SP-110 part needed

[Al Parker]

Hi John,
    I suspect that a 530-1350kc band osc. coil from the SP-200 series will 
work in the SP-110, but can't say for sure.  I have a few Rider's pages for 
the SP-110 that aren't on The Hammarlund Historian manuals page (yet), and 
the ckt looks the same at the coils.  Just be aware that many of the 200 
series didn't cover the BC band.
    It isn't too hard to remove and rewind the antenna coils, I've done that 
on the lower freq. band, 100-200kc, in an SP-210LX, you can see that at 
http://www.hammarlund.info/SP200.htm along with the rest of that project.
73,
Al, W8UT
New Bern, NC
www.boatanchors.org
www.hammarlund.info

----- Original Message ----- 
From: "John Flood" <kb1fqg at yahoo.com>
To: <boatanchors at mailman.qth.net>
Sent: Monday, March 24, 2008 10:38 AM
Subject: [Boatanchors] SP-110 part needed


> Greetings,
>
> Have a friend who is rebuilding an older Super-Pro SP-110 and thinks only 
> one part is needed to complete the job.  He is looking for, as he 
> describes it, the antenna coil for the lowest band setting.  (I think 
> that's the 530- 1350KC? band) his assembly has an open coil.  Rewinding it 
> is his last resort.  He was hoping to find one from an organ donor.  He 
> was wondering if the same assy. from later SP's would work?  In any event 
> anyone have one?  If so contact me with what you want for it.
>
> John Flood
> KB1FQG
> _______________________________________________
>