[Boatanchors] Amps for QRP rigs

[Revcom]

That's about all there is out there.  There were some very well built
"ham" amps targeted for the CB market that actually had band switching
filters and tuned outputs.  Most however are "trash in-trash out"/amplified.

Yaesu made one, their FL-110, covered 160-10M.  Built very well,
had bandswitched, tuned low-pass output filters.  Made to mate up with the
FT-7 and FT-301S xcvrs.  Think took about 5-10W drive for around 100W output
on SSB.

Ran off 12V.  I have one somewhere, never hooked it up to try it.

Rod
K0EQH

----- Original Message -----
From: "DW Holtman" <tubestuff at comcast.net>
To: <boatanchors at mailman.qth.net>
Sent: Saturday, March 15, 2008 8:14 AM
Subject: [Boatanchors] Amps for QRP rigs


Hello,

Does anyone make a good quality 100 watt HF Amp? Something that will amplify
from around 5 watts fo around a 100 watts on 80 through 10. The only thing
that I can find are a bunch of 10 meter (CB??) amps for SSB and AM.

Thank you in advance.

Best,
DW Holtman
WB7SSN
_______________________________________________