[Boatanchors] 75A-4 Schematic needed

[Jim Brannigan]

I don't think that unbroken schematics are on the WEB, most are scanned on 
page size scanners.
Full, unbroken schematics are usually available from commercial manual 
suppliers.

I use the WEB schematics as "working" copies to mark-up and scribble on.
They are easy to assemble using  rubber cement.
Rubber cement does not dry immediately, so there is time to align the pages 
and "lines"
Use plenty of cement and squeegee the seams with a ruler to flatten them and 
force the extra glue out.
When the glue is dry, simply rub the paper with your fingers to remove 
excess glue.
For extra strength, tape the back seams, trim the paper and fold as needed.
The finished product looks like a full sized scan

Jim


> Does a full schematic exist on the web that is not broken up into pieces? 
> I'd like to print one out without taping it together.  So far the ones 
> suggested recently are in pieces.
>
> Thanks,
>
> Bill, K3PGB
>
> _______________________________________________