[Boatanchors] DY/11 Dyno problem solved

[Sheldon Daitch]

Similarly, I had an old Spotmaster tape cartridge player, used in
a broadcast operation, which developed an intermittent cueing problem. 

Finally, I had to go into the unit and found a lead of one of the 
transistors
on the cue amplifier had never been soldered.  Not a bad joint, but never
soldered.  It had worked for years on just the contact pressure of the
transistor's lead against the edge of the PC board conductor.

73
Sheldon


hoopmonk at snet.net wrote:

>I want to thank all who offered suggestions to my ART-13 dyno connector problem. It turned out to be a bad solder job to the no. 6 wire to terminal connection inside the dyno chassis. I guess the people that built these were not immune from complacency either. I know I have been guilty of it at times.  It was an orginal joint and was obviously just hanging on for all these years. 
>
>73's
>Bob Weaver W1GTH
>_______________________________________________
>  
>