[Boatanchors] Harris RF-302 Ant Coupler

[Glenn Little WB4UIV]

I no longer have the manuals for this set. Be very careful with the RF-301. 
It uses a very hard to align "synthesizer". You need either a frequency 
selective voltmeter (called out in the manual) or a spectrum analyzer to 
align the RF-301. It uses a number of spectrum comb generators where you 
mix a tooth from each to get the desired frequency. Unless carefully 
aligned, you will have spurs all over the place. I had one many years ago 
and quickly got rid of it.

The tuner is fairly simple and should easily be reverse engineered if you 
cannot locate the manual.

73
Glenn
WB4UIV

At 09:28 AM 09/29/07, Keith Densmore wrote:
>Hi All,
>Does anyone have or know the location of a schematic diagram for the old 
>Antenna Coupler that mated with the Harris RF-301 transceiver? The manual 
>is available on line for the radio, but I can't find anything on the Coupler.
>
>Thanks, 73,
>Keith, ve3ts
>_______________________________________________
>Boatanchors mailing list
>Boatanchors at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/boatanchors
>** List Administrator - Duane Fischer, W8DBF/W9WZE **
>** For Assistance: dfischer at usol.com **
>$ For vintage radio info, see the HCI web site $
>http://www.w9wze.net
>